I'm sorry I haven't been getting back to any of you. My grandmother had a stroke on Tuesday and passed away this morning. I'm having a bit of a hard time, so I may take a bit of a break. I'm going to see how I feel. Sometimes designing helps me release, but lately I haven't felt like doing anything. Thank you for all your comments and interest in my designs and blog. Hopefully I'll be back soon.
I have so many designs I'd like to create for you. I'm thinking of doing a group of "adoption" designs if anyone is interested. I've been searching the design archives looking for adoption related designs, and there is nothing! If you are adopting or have adopted, leave your suggestions. I was adopted when I was a baby so I have a few ideas coming from the adoptee side, but not as much experience from the adoptive parent side.
As for what is coming this week, I have a collection of fun hearts to get your juices going for Valentines Day. Still a ways away, but hopefully this will give you plenty of time. They are coming in collections of 3 or 6. Here's one set:
Although it looks a little intimidating this is actually one of the easiest 3Ds to assemble. The best part is that this 3D once assemble, can actually fold flat and be sent in an envelope. You could write on the front or just store it as an ornament for Christmas or Valentine's.
First take the stucture pieces. These are the two pieces that are not hearts and look different.
Next fold down all the tabs on the top and bottom of each one. They are perforated to bend at the right places. You will notice there are two tabs in the center that are not perforated and do not need to be folded down.
Insert the folded structure piece into the slits on the largest heart. Be sure you insert the structure piece so that large heart rests next to the two tabs that did not fold. It should be in the exact center of the structure piece. Repeat for the second structure piece. After it is in place, fold up the tabs next to the heart to lock it in.
Take one of the middle sized hearts and insert it onto the structure pieces. Once in place straighten those tabs to lock it in place as shown above.
Take the smallest heart and place it onto the structure pieces. Note: if you plan to put a message on the front write it on the front piece before it is applied. Lock it in place with the tabs.
Now repeat for the back side. Apply the mid-sized heart and then the smallest heart.
Once all your pieces are in place and locked with the tabs. Push the small heart to the side to pop it up. Pretty cool!
Then if you want to fold it back flat, push it back and it will collapse.
Did you collect all twelve of the "12 days of Christmas" ornaments and charms? Also, if you didn't see the free design from a few posts ago, be sure to grab that too! These are busy holidays, so I'm keeping the challenge open until January 5th. You have almost a month to show me what you can do with that little freebie. Submit your photo on the Daley Designs facebook page by posting to the wall. If there's good enough response, maybe we'll make the freebie flourishes a monthly or bi-weekly thing. So be sure to tell your friends! (Click here to go to the freebee post)
I have a sneak peak for you of a fun new design coming next week. Lets see if you can guess what it is.
So if my computer hadn't crashed at the beginning of the week, you would have seen these A LOT sooner! There are a lot of fun things coming your way. If you like 3D it just gets better! Don't worry if you haven't quite caught the love of 3D designs, I have a variety of things up my sleave too. These cute little numbers are decorating our tree right now. Why spend tons on ornaments, when you can make them yourself! We've used plain cardstock on ours, but these would be beautiful in something a bit more fancy! With out further adu (think I spelled that wrong) what we've been working on all week, the ornaments:
Also, I have some new packs of faux stitching designs too. Yes, besides lying in bed sick, taking care of sick toddlers and complaining that my blasted computer keeps crashing (anyone else have that problem with HP computers?) I have actually been trying to get something accomplished. So, again, without further adu (mayber I better look up how to spell that.) here are the faux stitches coming your way:
There are 3 different sets of the faux flourishes that you can mix and match however you like. I prefer not to use the outline on the those but wanted to provide them for you incase you wanted them.
And how about some regular cuts. To go along with the faux flower above, I have a regular cut to match it plus another fun flourished flower. Some of you may be thinking "Flowers?! It's winter!" Well all we get is rain and things are green over here, plus don't flowers just make you feel warm when there's snow all around?
Be sure to get the free GSD in the previous post and submit your photos on facebook!
So, I did end up catching what my kiddos had of coarse. But I'm back. And back with your promised freebee from Facebook! Too many flourishes? Nah! You can never have too many flourishes. Oh, the possibilities! Here's the flourish freebee, now let me see what you do with it! Upload your creations to the Daley Designs facebook page, and I'll feature one lucky entry here on the blog! Now a deadline...hmmm...you have a week from tomorrow. I'll randomly pick one lucky person next Friday (the 17th) to showcase their creation here! Now get busy my friends!
I'm trying out a new "File Sharing" site. We'll see if this is less complicated and more user friendly than Metafile. Let me know if you have problems. (Click on the picture below to download file!)
No good deed goes unpunished... So I thought I'd be nice by making a two-fer (Two different tree snow globes for one) but I just ended up confusing you guys by not explaining that you can make it with just 3 trees 1 3D and two 2Ds. Or the Forested one with a total of 1 3D and 6 2Ds. So thats why many of you have extra pieces. Below the Dark Blue only has the 3 trees the light blue is the 7 trees. So heres the tutorial.
Slip C onto D starting at the tree ignoring the top part of the snow globe. Once the the trees are lined up. Place the top of C into the top of D to line it up.
Lay C and D flat together.
Then line up the tree in E with the joined CD tree. Once together place the top of E inside of the combined CD top.
Let CDE flat together. Bend slightly at the verticle axis so that it can go inside of ring A and B.
Place A on the top and B on the bottom (there identical so don't waste any time trying to tell them apart). Enter all of the into one slot as seen above. Once you get this set up you can start seperating them to their individual spots.
Once separated the globe is done and you can set it into the base.
Here's a close up. One other possible use. We've placed ours on the tree as ornaments. They look awesome. Have fun let me know if you have any questions.