3D Cornucopia Part 2 plus inking tutorial

This is PART 2 of the 3D Cornucopia tutorial. 

In this tutorial, I quickly cover applying the accent shapes and finishing touches that I used in my sample.

If you haven't been through PART 1, click HERE.

We ended the last tutorial with just the basic form. 

It by itself, could be used for decorations or as a gift. If you want to add a little more though, I've provided some accent shapes to dress it up even more. You could mix up the strips in different papers to jazz it up even more than I have. 

Cut the accent shapes.

I cut my accents from a cream paper with a burnt sienna colored design. 

After cutting them, I inked the edges of each piece. 

Inking mini-tutorial.

Here's a mini tutorial for how I ink my papers. I'm no pro at this so please don't think this is the way you must do it. There are many techniques, and this is just how I've found to do it. I'd love to hear what your techniques are too!

To ink the easy to access edges of the paper, I simply hold my paper in one hand and brush my ink pad from inside to outside softly a couple times until I acquire the darkness I want. I go from inside to outside instead of side to side. I find that I get a softer, more gradual gradient change this way.

To ink the small cuts like the circles in this shape, I lay my shape on a scrap piece of paper. Then I take a cue tip and dab a little ink on the end. Then carefully dab or brush my paper to the desired shade. I find that it's best to only put a little ink on my paper at a time. This way I don't darken the edge too much and still get that soft gradual color change. 

In my sample, I used Colorbox's Classic Pigment Cat's Eyes. These are definitely not my favorite inks to use, but I can use my JoAnn's coupons to get them for a good price and they come with 6 colors and stack nicely saving space. 

I used the "Cocoa" ink for this project. 

So to continue with the assembly tutorial...

Adding the cornucopia rim.

I didn't show this shape up above, but you should be able to find it in your file. 

The shape that looks like an arch with scallops on both sides is the accent for the rim of the Cornucopia.

Start from the center!

When applying the rim, be sure to find the center of the rim shape and where it coincides with the actual rim. Because of the curve, if you don't start in the center when adhering this piece, it won't fit right. So glue the center and work your way around each side, lining up the outer scallop edge.

Center the largest accent.

Starting with the reverse scalloped accent, center it on the largest ring of the Cornucopia. Again, be sure to start from the center. 

The accents for the largest three rings will only go to the perforation marks since they won't be seen on the bottom. The rest will fit around with a small gap at the back. 

Continue adding accents and your done!

Now fill with wax fruit, paper fruit or real fruits and veggies 

and enjoy at your feast this November!

It's candy time with a little bit of egg!

Easter is in two days. Here's a quick gift tag I made for my candy dispenser I'm giving to friends. I'll also show you how I packaged the dispenser for giving away!
If you haven't already, go to the Silhouette Online store, and purchase this design I made a few weeks ago:

I am making 3 tags, so I cut 3 of the plain eggs and 3 of the patterned eggs. I brushed an ink pad across the edges of the plain eggs to give them some character. (I used Versa Color in 183 Cement on white cardstock if you were wondering.)

I added the patterned eggs I cut earlier from my blue cardstock.

Then punched holes in them to make tags. I had intended to added circles to my eggs before I cut them so my Cameo could do the work, but forgot. So I just went old school and used a hole punch.

 Since these are for the candy dispensers, I made sure to mention to my friends to break the paper band off that holds the dispenser closed. 

So all I did to keep the candy dispenser closed was cut a strip off of my scraps from the box and formed it into a ring that fit around my box. I decorated the band with another strip of the accent paper. Easy peasy! 

Then I took the lid off my box, closed the dispenser bucket, and slid the band over... 

...filled it with candy, (one package of large Robin Eggs, minus 4 eggs, fills a dispenser perfectly)...

...and added my egg tag!

Have a happy Easter everyone!

handled box tutorial

Most of the boxes with handles I've made available to the Silhouette Online store will follow the following assembly instructions. This includes:

• 3D handled box - heart (single heart window
• 3D handled box - hearts (2 welded hearts window)
• 3D handled box - lace (artisan looking lacey window)

The "3D heart handled box" is the only one at this time that's a little trickier, but it assembles the same. I'll let you know the tricky part on that box when we get to it, but for now, follow the tutorial below for it as well. 

Step 1

Crease all folds except the handles toward the inside. Handles fold towards the outside.

Step 2

Apply adhesive to tab on side, fold box around and attach tab to other end like photo below:

Step 3

 Fold bottom tabs in.

Step 4

 Tuck bottom round tab into slot.

Bottom should now look like this:

Step 5

If assembling one of the boxes with a window, attach cellophane or transparency material across the window on the inside. I usually roughly outline the window on the inside and place a square piece of thin *overhead transparency across the adhesive and window.

*You can find overhead transparency at most office supply stores.

Step 6

Fill box with goodies, gifts, or a special message.

Step 7

 Fold down sides with handles so the handles meet in the middle.

Step 8

 Fold over the side that does NOT have the round tab connected, making sure the handles slide into the slit. 

*This is the tricky part I told you about if you are assembling the "3D heart handled box". You have to gently push and bend the handle to fit through the slit. Be sure to work it through gently. 

Step 9

Fold the other side over and tuck the round tab into the slit on the other side. 

And your done! 

ribbon wrapped box tutorial

The "Ribbon-wrapped box" is created from 4 shapes to give you the possibility of contrasting papers like I have done. I made my light blue shapes about 4 and quarter by 6 inches to give you an idea of the largest size you can fit on a 8.5x11 sheet when using only 1 sheet of each color.

The first step to assembly after you have all your shapes cut out is to use your favorite adhesive to connect the tabs of the dark blue to the sides of the light blue as shown.

 Repeat until you have this:

(Notice the the shapes with two slits alternate with the shapes that have one slit)

Adhere your last tab to the other end to create the box shape.

To close the bottom of the box, simple fold down the identical flaps as shown:

 Then fold the dark blue flaps down while tucking the tab inside the slit.

For the next step, I don't have a photo, so hopefully I can explain it. (finished photos at the bottom show this a little)

Feed your ribbon through the slits of the light blue tabs. You will want to make sure at this step that your ribbon is centered (equal length on each side.)

Then flip the box over. Wrap each side over the bottom. 

 Making them cross over each other as shown:

Pull tight and hold while flipping the box right-side up as shown below:

 Next feed your ribbon through the bottom slit of the dark blue. 

And then feed back the other way through the top slit on the same tab. Feeding through two slits is what keeps your bow on TOP of the box instead of under the flaps.  

 Repeat for the other side and you're ready to go.