a Joyful creation

So why did I not get my mother's genius staging and accessorizing creativity?! I'm an artist, so you'd think all creativity would come natural. Um, no. When it comes to decorating and enhancing the basics, my Mom has me trumped there. Here is a peek at her latest project.

I love her color choice and fun objects. 
This uses a combination of some of the artists that license their artwork to Silhouette. For example, the cute lights are from Loni Harris, christmas wreath is from Jamie Koay and the star is from Lori Whitlock. 
And of coarse the letters are from me!
Jodi modified the "Letter U box" to make a "J" that would allow a platform for the 3D tree. You can see how she modified the design on her blog
 Needles 'n' Knowledge.

Be sure to check her post out and other great inspiration on her blog!

3D alphabet tutorial by Sarah Traub

Hello all! One more quick post. 

I realized that I posted about the great video tutorial by Sarah Traub on our FB page but forgot to post it on the blog too. So for those who have not seen it...check it out on Youtube. Sarah does a great job of walking you through building the letters for "FALL". This will give you the basic idea for the rest of the alphabet
and hopefully answer many of your questions. 
As she points out in the video, there is one mistake in the letter "A". There is a piece that needs to be reversed. So, please keep an eye and ear out for that. Without further adieu...Sarah Traub!

3D Cornucopia Part 2 plus inking tutorial

This is PART 2 of the 3D Cornucopia tutorial. 
In this tutorial, I quickly cover applying the accent shapes and finishing touches that I used in my sample.

We ended the last tutorial with just the basic form. 
It by itself, could be used for decorations or as a gift. If you want to add a little more though, I've provided some accent shapes to dress it up even more. You could mix up the strips in different papers to jazz it up even more than I have. 

Cut the accent shapes.
I cut my accents from a cream paper with a burnt sienna colored design. 
After cutting them, I inked the edges of each piece. 

Inking mini-tutorial.
Here's a mini tutorial for how I ink my papers. I'm no pro at this so please don't think this is the way you must do it. There are many techniques, and this is just how I've found to do it. I'd love to hear what your techniques are too!

To ink the easy to access edges of the paper, I simply hold my paper in one hand and brush my ink pad from inside to outside softly a couple times until I acquire the darkness I want. I go from inside to outside instead of side to side. I find that I get a softer, more gradual gradient change this way.

To ink the small cuts like the circles in this shape, I lay my shape on a scrap piece of paper. Then I take a cue tip and dab a little ink on the end. Then carefully dab or brush my paper to the desired shade. I find that it's best to only put a little ink on my paper at a time. This way I don't darken the edge too much and still get that soft gradual color change. 

In my sample, I used Colorbox's Classic Pigment Cat's Eyes. These are definitely not my favorite inks to use, but I can use my JoAnn's coupons to get them for a good price and they come with 6 colors and stack nicely saving space. 

I used the "Cocoa" ink for this project. 

So to continue with the assembly tutorial...

Adding the cornucopia rim.
I didn't show this shape up above, but you should be able to find it in your file. 
The shape that looks like an arch with scallops on both sides is the accent for the rim of the Cornucopia.

Start from the center!
When applying the rim, be sure to find the center of the rim shape and where it coincides with the actual rim. Because of the curve, if you don't start in the center when adhering this piece, it won't fit right. So glue the center and work your way around each side, lining up the outer scallop edge.

Center the largest accent.
Starting with the reverse scalloped accent, center it on the largest ring of the Cornucopia. Again, be sure to start from the center

The accents for the largest three rings will only go to the perforation marks since they won't be seen on the bottom. The rest will fit around with a small gap at the back. 

Continue adding accents and your done!
Now fill with wax fruit, paper fruit or real fruits and veggies 
and enjoy at your feast this November!

3D Cornucopia

This is a tutorial for assembling the 3D Cornucopia die cut that can be found in the Silhouette Online store. For more information about the Silhouette Cameo and other products from Silhouette, click HERE.

To start, cut your body of the cornucopia. 
I cut mine from medium weight brown cardstock. Light weight also works great for this design.
*Because there is such a tight curve at the end of the cornucopia, I suggest that you stay away from really heavy cardstock. Otherwise your paper will crease instead curl.
The two halves of the cornucopia are almost identical. The differences being that one of them has a long tab that stretches the length of the cornucopia and then only half of the small tabs on each horizontal strip.

Apply adhesive to the underside of the shape with the small "half" tabs as shown in the photo below. 
Glue the two halves together.
Line the small half tabs up with the full small tabs. You should be able to see the half tabs on the correct side of the paper. This will be important later on.

Curl your cornucopia.
Next, to help create your cone shape, you will want to put some curl in your cornucopia by pulling and rubbing it on the edge of a table as shown below. It's kind of like curling ribbon with scissors except that the table edge is your scissors and you're curling the paper around the small point.

In the end, you should get a half cone shape like above.

 Shape cone point.
To further shape the point of the cornucopia, form it around the tip of pen or pencil. 

Along the edge of the long tab are a couple of what look like far spread perforations. These are guides for glueing the two remaining ends of the cornucopia together. They are NOT a fold line, just guides. 

Start to make your cone shape.
To start to create your cone shape, start on the wide scalloped end. Line the non-tabbed side up with the "perf" cut lines that were mentioned above. 

Once you have that last step done, you are to the hardest part of the whole assembly, forming the point of the cone!
Finish connecting the two sides above 
all the way to the point. 
You will most likely have to squeeze your fingers through the slats to hold the seam together until it dries. I repeat, this is the most difficult part. If you can get this, the rest can be done. 

This is what you should end up with. 

Create the curve of the Cornucopia.
Now to start to form the curve of the Cornucopia. Apply adhesive to the tab closest to the point. It is very important that you start with the this tab, otherwise you won't be able to put the pressure on the connection to get it to stay. 

Attach tab to next ring.
When I mentioned above that you needed the "half tabs" on the outside, this is the reason. You will line up that center line with the center line of the ring next to it. Reach your finger through the next slit to hold the joint together until the glue has dried. 

Repeat with next tab.
Continue with next tab, adhering it to the next ring. All the way down to the last slit.

Repeat for every tab. 
This is your basic cornucopia shape.

Keeping the Cornucopia upright.
One last thing to complete the basic shape. There are perforation lines on the bottom of the largest three rings. This is to help form the cornucopia to stay upright. Crease these perforations by holding the cornucopia or place it on the table and press from the inside.

Ta Da! Basic shape complete!

Because of the length of this tutorial, I've decided to split it into two parts.
Part 2 will cover the accent shapes and final touches.
Please click HERE to go to PART 2 of the 3D CORNUCOPIA TUTORIAL.

Related Posts with Thumbnails